How to Inspect a Watch in a Shop Before You Pay
A friend once called me from a pre owned watch shop, thrilled. He had found a ten year old diver at 30 percent under the going rate, and the dealer was holding it for an hour.

A friend once called me from a pre owned watch shop, thrilled. He had found a ten year old diver at 30 percent under the going rate, and the dealer was holding it for an hour. I asked him to do four things before paying: pull the crown, look at the screw heads on the clasp, wind it and listen, and read the lume in a dark corner. Twenty minutes later he called back. The crown would not screw down, the bracelet had been polished hard, and the lume was a different colour from the hands. He walked away.
When you inspect a watch in a shop, you have a short window and a salesperson watching. Knowing what to look at, and in what order, turns that window from a nervous few minutes into a proper check. This is the routine I use, whether the watch is new in an authorised dealer's case or second hand on a velvet tray.
How to Inspect a Watch in a Shop Without Feeling Rushed
Ask to handle the watch on a soft mat at the counter, not over a hard floor. Say plainly that you like to check a watch before buying. Good dealers expect it and will give you time. If a seller hurries you or refuses to let you hold the piece, that tells you something about the sale already.
Bring three things: a small loupe or your phone's camera zoom, a soft cloth, and a list of the reference number and the details that model should have. A 10x loupe costs around 10 dollars and is the most useful buying tool you will ever own.
The Case and Crystal Under Good Light
Tilt the watch under the shop lights and look along each surface, not straight at it. Scratches and polishing marks show up best at a low angle.
- Edges and bevels. Sharp, crisp lines between brushed and polished areas suggest the case has not been heavily refinished. Soft, rounded edges mean metal has been removed.
- Lug holes. Even, round holes with no elongation or burrs. Damage here often points to careless strap changes.
- Crystal. Chips at the edge of sapphire are permanent and cost 100 to 300 dollars to replace on most models.
- Caseback. Tool marks around the notches suggest someone opened it without the right equipment.
The Dial, Hands and Lume
Use the loupe here. The dial is the hardest part to repair or replace authentically, and it drives most of a watch's value.
Printing should be sharp and evenly inked, with no fuzzy edges or bleed. Check that the hands line up with the markers at 12, 3, 6 and 9 when set. Spots, bubbling or moisture marks under the crystal mean water has got in at some point. Finally, cup your hand over the dial or step into a darker corner. The lume on the hands and markers should glow in the same colour and at a similar strength. A mismatch usually means one part has been replaced.
Crown, Pushers and Movement Checks
This is where most buyers stop looking, and where the expensive problems hide.
- Unscrew the crown. It should turn freely and pop out cleanly. Screw it back down. It should catch smoothly on the first turn without grinding.
- Hand wind it. For a mechanical watch, wind 10 to 15 turns. It should feel smooth and even, not gritty.
- Set the time. Pull to the setting position and move the hands a full circle. They should move without jumping or slipping.
- Use the date and any complication. Advance the date past midnight, and run a chronograph through start, stop and reset.
- Listen. Hold it close to your ear. A steady, even tick is good. A scraping sound or an irregular beat suggests the movement needs work.
Ask when the watch was last serviced and whether there is a receipt. A full service on a mainstream automatic usually costs 300 to 700 dollars, so a watch due for one should be priced accordingly.
The Bracelet and Clasp
A bracelet can lose a surprising amount of value through wear. Hold the watch by the case and let the bracelet hang. Heavy sag or a bracelet that droops in a deep curve means the pins and links are worn, called stretch. Replacement bracelets on some brands cost over 1,000 dollars.
Count the links and ask whether spare links come with it. Open and close the clasp several times. It should click firmly and hold. Look at the screw heads on the links for scratches from a poor fitting job, which tells you how carefully the watch has been handled.
Why Box and Papers Are Not the First Thing to Check
A lot of buying advice starts with paperwork: no box, no papers, no sale. I think that puts the order backwards. Papers are easy to request and, sadly, easy to fake. A worn movement, a replaced dial or a stretched bracelet is far more expensive to fix than missing papers.
Inspect the watch itself first. If it passes, then compare the serial number on the case with the one on the warranty card, and look at the dealer stamp and date. Papers add value and confidence, as covered in how much box and papers really add, but they confirm a good watch rather than create one.
Questions to ask before you pay
Ask about the return window, any shop warranty, whether parts have been replaced and who serviced the movement. Write the answers on the receipt if possible. For the online version of these questions, see questions to ask before buying a used watch online.
Frequently Asked Questions
Is it rude to inspect a watch closely in a shop?
No. Serious dealers expect careful buyers, and handling a watch properly on a mat shows respect for the piece. Be polite, explain what you are checking and avoid forcing anything that does not turn easily.
Can I ask the shop to open the caseback?
You can ask, and some dealers with a workshop will do it. Many will not open a watch on the counter because of dust and liability. If they refuse, ask for a recent service record instead.
Should I check a brand new watch from an authorised dealer?
Yes, briefly. Look for scratches from display handling, check the crown and date work, and confirm the serial on the case matches the warranty card. Factory faults are rare but do happen.
The Practical Takeaway
Before your next shop visit, write a short checklist on your phone: case edges, crystal, dial under the loupe, lume in the dark, crown and winding, bracelet stretch, then papers. Work through it in that order every time. Fifteen calm minutes at the counter will save you far more than any discount the dealer offers. More buying guides sit in the buying section.
More in Buying a Watch
Buying a Watch
How to Spot a Fake Watch Before You Hand Over Cash
A friend sent me eleven photographs of a steel diver he had agreed to buy for 4,100 in cash, meeting in a supermarket car park...
Buying a Watch
How to Buy a Watch at Auction Without Overpaying
The hammer falls at 3,200 and for about four seconds you think you have just bought a watch for 3,200.
Buying a Watch
Duty Free Watch Buying and Whether It Really Saves Money
You have two hours before boarding, the airport watch boutique has the model you have been eyeing for months, and the sign says...