Watch Jewels Explained and What the Jewel Count Means
The dial says "25 Jewels" and the seller treats it like a selling point, but you have no idea whether 25 is good, normal or a gimmick. Watch jewels are one of the most visible numbers on a mechanical watch and one of the least explained.

The dial says "25 Jewels" and the seller treats it like a selling point, but you have no idea whether 25 is good, normal or a gimmick. Watch jewels are one of the most visible numbers on a mechanical watch and one of the least explained. They are not precious stones added for sparkle, and a higher count does not automatically mean a better watch.
Here is what watch jewels actually do inside a movement, where they sit, what a normal jewel count looks like for manual, automatic and quartz watches, and why some old watches with huge numbers were mostly marketing.
What watch jewels are and why they exist
A mechanical watch is a set of tiny steel axles, called pivots, spinning inside holes in brass plates. The balance wheel alone swings back and forth around 691,200 times a day in a common 28,800 beats per hour movement. If those steel pivots ran straight in brass, the holes would wear oval within a few years and the watch would lose accuracy, then stop.
Jewels solve that. A jewel is a small, extremely hard, polished bearing that a pivot runs in. Today almost all of them are synthetic ruby, made from aluminium oxide, the same material as natural ruby and sapphire. Synthetic rubies have been produced cheaply since the early 1900s, so a jewel in a modern watch is worth a fraction of a cent. Its value is in what it does, not what it is.
Jewels help in three ways:
- Low friction. Polished ruby against polished steel creates far less friction than steel against brass.
- Hardness. Ruby is about 9 on the Mohs scale, so the hole keeps its shape for decades.
- Oil retention. Many jewels are shaped with a small cup that holds a tiny drop of oil exactly where the pivot needs it.
Where the jewels sit in a movement
Not every jewel does the same job. If you look through a display caseback you will see red dots on the bridges, but several of the most important jewels are hidden underneath. Our guide to how a mechanical watch actually works explains the parts these jewels support.
| Jewel type | Where it is | What it does |
|---|---|---|
| Hole jewels | At each end of the gear train wheels and the balance staff | Act as bearings for spinning pivots |
| Cap jewels | Flat jewels on top of the balance hole jewels | Limit end shake and hold oil; often part of a shock protection system |
| Pallet stones | Two jewels on the pallet fork | Lock and release the escape wheel teeth with each beat |
| Impulse jewel | A small pin on the balance roller | Receives the push from the pallet fork that keeps the balance swinging |
The escapement jewels, the pallet stones and the impulse jewel, take the hardest wear of all. They are struck many times per second for the whole life of the watch, which is why a worn or dry escapement is one of the first things a watchmaker checks.
What a normal jewel count looks like
For a simple, time only manual wind movement, 17 jewels has been the standard for decades. That covers every pivot in the gear train and the escapement, with cap jewels on the balance. Complications and automatic winding add more moving parts, so they add jewels.
- Manual wind, time only: usually 17 jewels.
- Automatic, time and date: usually 21 to 26 jewels. The Miyota 8215 has 21, the Seiko NH35 has 24, and the Sellita SW200 has 26.
- Chronograph: often 25 to 37 jewels, because of the extra wheels and levers.
- Quartz: anywhere from 0 to about 7. The motor turns slowly and with little force, so jewels matter far less.
The automatic winding system explains much of the jump from 17 to the mid twenties. The rotor and reverser wheels spin constantly as you move, so jewelling them extends their life, as described in our guide to how an automatic watch winds itself.
Why more jewels is not always better
The common advice for first time buyers is "the more jewels, the better the movement". I disagree. Past a sensible count, extra jewels tell you very little about quality, and in some eras they told you nothing at all.
In the 1960s, jewel counts became a marketing contest. Some brands advertised 41, 77 or even 100 jewels. Many of those extra jewels were non-functional: set into the automatic winding parts where they carried no real load, or simply placed for decoration. In 1974 the international standard ISO 1112 was introduced to define what counts as a functional jewel, and the most extreme numbers faded away.
A well finished 17 jewel manual movement can easily outlast and outperform a badly regulated 25 jewel automatic. Quality comes from the precision of the parts, the hairspring, the regulation and the finishing. If you are comparing two watches, look at accuracy specs, service history and the reputation of the movement rather than the number printed on the dial.
Missing jewels are a real warning sign
The opposite case does matter. A mechanical movement with too few jewels, say 7 or fewer in a time only watch, cuts costs by letting key pivots run in brass. These pin lever and budget movements were common in cheap watches of the 1950s to 1970s. They can work fine for years, but they wear faster and are often not economical to repair.
Do jewels wear out or need servicing?
The jewels themselves rarely wear out in normal use. What fails is the oil. Over four to seven years the lubricant dries or thickens, and a dry pivot running in a dry jewel causes wear on the steel and sometimes cracks the jewel. That is the main reason watchmakers recommend a regular service, which we break down with real prices in how often to service a mechanical watch.
A hard knock can also crack a jewel, especially a balance jewel. Shock protection systems mount the balance cap and hole jewels in a sprung setting so they can move slightly and spring back, which saves the delicate balance staff from snapping. If a watch suddenly stops after a drop, a broken balance jewel or staff is a common cause, and replacing a jewel is usually a routine job for a watchmaker.
Frequently asked questions
Are watch jewels real rubies?
They are real ruby in chemical terms, aluminium oxide, but they are synthetic rather than mined. Synthetic rubies have been made since the early 1900s and cost almost nothing. They have no resale value as gems, even in very expensive watches.
Is a 17 jewel watch good?
Yes. A 17 jewel count is the full set for a time only manual wind movement, covering all the parts that need it. Many respected movements from both Swiss and Japanese makers use exactly 17 jewels, and a well made one will run for decades with regular servicing.
Why do quartz watches have so few jewels?
A quartz watch uses a battery and a small stepping motor that moves the hands once per second with very little force. There is far less friction and wear than in a mechanical gear train and escapement, so jewels are rarely needed. Some higher grade quartz movements add a few to the gear train for longevity.
More in How Watches Work
How Watches Work
Watch Keyless Works: How the Crown Sets the Time
A reader sent me photographs last spring of a 1970s hand wound watch he had picked up at a house clearance for about 40 pounds.
How Watches Work
Watch Shock Protection and What a Drop Really Damages
A reader wrote to me last month after knocking his automatic off a bathroom shelf onto tiles.
How Watches Work
Tourbillon Watch Explained and Whether It Improves Accuracy
A tourbillon watch can cost more than a car, and the rotating cage behind its open dial is hypnotic to watch.