Magnetized Watch Signs and How to Fix It at Home
Your mechanical watch was keeping time within a few seconds a day, and suddenly it is gaining five minutes or more. Before you book an expensive service, check the most common and cheapest cause: a magnetized watch.

Your mechanical watch was keeping time within a few seconds a day, and suddenly it is gaining five minutes or more. Before you book an expensive service, check the most common and cheapest cause: a magnetized watch. Modern life is full of magnets, from laptop lids to handbag clasps, and a single close encounter can throw a healthy movement badly off.
This guide explains how magnetism affects a watch, how to test for it at home in two minutes, and how to fix it for about the price of a strap.
How a watch becomes magnetized
A mechanical movement is regulated by the balance wheel and its hairspring, a coil thinner than a human hair. In most watches that spring is made of a steel alloy. When it passes through a strong magnetic field, the coils can become magnetized and stick to each other slightly. That makes the effective spring shorter, so the balance swings faster and the watch gains time.
Common sources include:
- Laptop and tablet covers, which use magnets to detect when the lid closes
- Phone cases with magnetic wallets or mounts, and wireless charging pads
- Magnetic clasps on handbags, cabinet doors and some bracelets
- Speakers, especially large ones without shielding
- Induction hobs and the magnetic knife strips in many kitchens
- Airport security scanners, though these are a less common cause than people think
Resting your wrist on a laptop palm rest for an evening is enough to do it. Distance matters a great deal: magnetic strength falls sharply over a few centimetres.
That is why a watch sitting a hand width from a speaker is usually safe, while the same watch resting on the magnet in a phone stand overnight is not.
Signs of a magnetized watch
The main symptom is a sudden change in accuracy, usually a big gain. A watch that ran plus 3 seconds a day might now run plus 2 minutes, or even plus 30 minutes in severe cases. Other clues:
- The change happened suddenly rather than gradually over months
- The watch has no recent impact, water exposure or crown damage
- It is a few years since the last service but it ran well until last week
- In rare cases the watch stops altogether and restarts when shaken
Gradual loss of accuracy over a year or two points more toward dried oils and wear. That is a service job, covered in our guide to how often to service a mechanical watch and what it costs.
How to test for magnetism at home
You need an ordinary compass. A phone compass app is not reliable for this, because the phone itself contains magnets.
- Place the compass flat on a table, away from metal and electronics, and let the needle settle.
- Take the watch off and hold it face up.
- Bring the watch slowly toward the compass, passing it around the needle at a distance of 2 to 3 centimetres.
- Watch the needle. If it twitches or swings as the watch passes, the watch is magnetized.
A tiny wobble when the watch is touching the compass can be normal on a steel case. A clear swing at a few centimetres is the sign you are looking for. For a more accurate picture, a timegrapher app with a phone microphone can show the rate change, but the compass test is enough to decide whether to demagnetize.
How to fix a magnetized watch
The fix is a demagnetizer, a small box that produces an alternating field. Simple ones cost about 10 to 25 dollars online, and many watchmakers will do it while you wait for a small fee, sometimes for free.
To use one at home:
- Remove the watch from any metal bracelet if possible, or just keep the bracelet loose.
- Place the watch flat on the demagnetizer.
- Press and hold the button.
- While holding, slowly lift the watch straight up and away, to about 30 centimetres, then release the button.
- Repeat the compass test. If the needle still moves, repeat with the watch turned 90 degrees.
The slow lift is the important part. Releasing the button with the watch still on the box can leave it magnetized again. After two or three passes, most watches return to their previous accuracy immediately.
| Option | Typical cost | Time |
|---|---|---|
| Home demagnetizer | 10 to 25 dollars, reusable | 2 minutes |
| Watchmaker or jeweller counter | Free to 20 dollars | 5 to 10 minutes |
| Full service, if not magnetism | 200 to 600 dollars or more | 2 to 8 weeks |
Is anti-magnetic marketing worth paying for
Watch advertising makes a lot of magnetic resistance ratings, such as 1,000 gauss or 15,000 gauss, and some buyers pay a premium for them. For most people, that premium is not necessary.
The international standard for a watch to be called magnetic resistant is 4,800 amperes per metre, about 60 gauss, and most daily magnets that cause trouble sit close to that level at short range. A watch with a silicon hairspring, now used by several large brands, is effectively immune to everyday magnetism. That is a real benefit, but it is a materials feature you can check in the specification, not something that needs a dedicated "anti-magnetic" model.
Given that demagnetizing takes two minutes and costs almost nothing, paying hundreds extra only for magnetic resistance makes sense mainly for people who work around MRI machines, large motors or laboratory equipment. Everyone else can buy the watch they like and keep a cheap demagnetizer in a drawer.
Preventing it in everyday life
A few habits help:
- Do not rest the watch on a laptop palm rest or next to the hinge.
- Keep it away from phone cases with magnetic closures overnight.
- Store it at least 10 centimetres from speakers and induction hobs.
- Avoid watch boxes with magnetic lid catches, or keep the watch at the opposite end.
Storage is where most accidental magnetism happens, so it is worth reading our notes on how to store your watches safely at home. For general habits, see how to care for a watch so it lasts a lifetime.
Frequently asked questions
Can a magnetized watch be permanently damaged?
Almost never. Magnetism changes how the hairspring behaves, but it does not break anything, and demagnetizing restores normal function. If accuracy does not return after demagnetizing, the problem is likely something else that needs a watchmaker.
Can a quartz watch become magnetized?
A strong field can stop the stepping motor of a quartz watch while it is near the magnet, but it usually restarts normally once moved away. Quartz watches are far less affected than mechanical ones and rarely need demagnetizing. If a quartz watch runs fast or slow, the battery or circuit is a more likely cause.
How do I know if my watch is magnetized without a compass?
The clearest sign is a sudden large gain in time, often minutes per day, with no knock or water exposure. A timegrapher app can also show a jump in rate. Still, a basic compass costs very little and gives the most direct answer.
More in Watch Care
Watch Care
Do You Need a Watch Winder for an Automatic Watch
I bought a two slot winder before I owned two automatics worth winding.
Watch Care
Quartz Watch Battery Replacement and When to Do It
A quartz watch that stops in a drawer usually gets left there.
Watch Care
Leather Watch Strap Care and How to Make a Strap Last Longer
A new leather strap can look tired within one summer: dark sweat marks near the buckle, a stiff crease at the holes, and a...