BSIS0 13583-1:2023 BSl Standards Publication Centrifugally cast steel and alloy products Part 1: General testing and tolerances bsi. BS IS0 13583-1:2023 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 13583-1:2023. It supersedes BS IS0 13583-1:2015, which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee ISE/111, Steel Castings and Forgings. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BSI in relation to the adequacy, accuracy, completeness or reasonableness of this publication. All and any such responsibility and liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application. @ The British Standards Institution 2023 Published by BSI Standards Limited 2023 ISBN 978 0539210088 ICS77.140.80 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2023. Amendments/corrigenda issued since publication Date Textaffected BS ISO 13583-1:2023 INTERNATIONAL ISO STANDARD 13583-1 Third edition 2023-02-03 Centrifugally cast steel and alloy products - Part 1: General testing and tolerances Produits en acier et alliages mouleés par centrifugation - Partie 1: Conditions genérales d'essais et tolérances Reference number IS0 13583-1:2023(E) ISO @ IS0 2023